kellerman Ierakstīts Februāris 11, 2019 Share Ierakstīts Februāris 11, 2019 (labots) Sveiki vīri. Tātad savam tunerim izdomāju pieštepselēt dvb-t usb puļķi. Jā, man tādi divi mētājās, abus savlaik arī darbināju arī no linuksa. Zinu, ka šeit arī kādam bija jābūt, kas to ir darījis. Internetā var atrast info par vecām firmvārēm, bet kā tur ir uz pēdējiem openatv/pli/vix imidžiem, par to neko daudz netradu. Vārdusakot: Viens it9135 rev2, otrs uz rtl2832u bāzes. Pasen atpakaļ pirkti ebayā, ķīniešu puļķi. Nu piedabūju vismaz draiverus, puļķi atpazīstas linuksā abi, dvb iekārta atpazīstas, bet ne viens ne otrs enigmā neredzas (redzas tikai integrētais dvb-s2 tuneris). Mēģināju uz jaunākā openatv 6.3 un openvix imidža. Rekur būs logs no it9135 puļķa: usb 3-1: dvb_usb_af9035: prechip_version=83 chip_version=02 chip_type=9135 usb 3-1: dvb_usb_v2: found a 'ITE 9135(9006) Generic' in warm state usb 3-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer DVB: registering new adapter (ITE 9135(9006) Generic) af9033 3-0038: firmware version: LINK 3.39.1.0 - OFDM 3.9.1.0 af9033 3-0038: Afatech AF9033 successfully attached usb 3-1: DVB: registering adapter 1 frontend 0 (Afatech AF9033 (DVB-T))... it913x 3-001c: ITE IT913X BX successfully attached Registered IR keymap rc-it913x-v1 input: ITE 9135(9006) Generic as /devices/platform/soc/f98a0000.xhci/usb3/3-1/rc/rc0/input3 rc0: ITE 9135(9006) Generic as /devices/platform/soc/f98a0000.xhci/usb3/3-1/rc/rc0 usb 3-1: dvb_usb_v2: 'ITE 9135(9006) Generic' successfully initialized and connected no rt2832: usb 1-1: dvb_usb_v2: found a 'Realtek RTL2832U reference design' in warm state usb 1-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer DVB: registering new adapter (Realtek RTL2832U reference design) i2c i2c-3: Added multiplexed i2c bus 4 rtl2832 3-0010: Realtek RTL2832 successfully attached usb 1-1: DVB: registering adapter 1 frontend 0 (Realtek RTL2832 (DVB-T))... r820t 4-001a: creating new instance r820t 4-001a: Rafael Micro r820t successfully identified Registered IR keymap rc-empty input: Realtek RTL2832U reference design as /devices/platform/soc/f9890000.ehci/usb1/1-1/rc/rc0/input3 rc0: Realtek RTL2832U reference design as /devices/platform/soc/f9890000.ehci/usb1/1-1/rc/rc0 input: MCE IR Keyboard/Mouse (dvb_usb_rtl28xxu) as /devices/virtual/input/input4 usb 1-1: dvb_usb_v2: schedule remote query interval to 200 msecs usb 1-1: dvb_usb_v2: 'Realtek RTL2832U reference design' successfully initialized and connected usbcore: registered new interface driver dvb_usb_rtl28xxu Ja ne ar šiem usb tuneriem, tad varbūt ir kāds, kas toč darbojas uz jaunākās enigmas? lsusb ar abiem piespraustiem: root@zgemmah9s:~# lsusb Bus 001 Device 002: ID 0bda:2838 Bus 002 Device 002: ID 04a3:0101 Bus 003 Device 002: ID 048d:9006 Bus 001 Device 001: ID 1d6b:0002 Bus 002 Device 001: ID 1d6b:0001 Bus 003 Device 001: ID 1d6b:0002 Bus 004 Device 001: ID 1d6b:0003 te kaut kas no pašas enigmas debug loga: 21:31:41.3458 driver/rc.cpp:143 getDeviceName [eRCInputEventDriver] devicename=ITE Technologies, Inc. DVB-T TV Stick 21:31:41.3459 driver/rc.cpp:143 getDeviceName [eRCInputEventDriver] devicename=ITE Technologies, Inc. DVB-T TV Stick 21:31:41.3460 driver/rcinput.cpp:702 eRCDeviceInputDev [eRCDeviceInputDev] device "ITE Technologies, Inc. DVB-T TV Stick" is a keyboard 21:31:41.3460 driver/rcinput.cpp:775 add [eInputDeviceInit] adding device /dev/input/event1 21:31:41.3460 driver/rc.cpp:143 getDeviceName [eRCInputEventDriver] devicename=dreambox advanced remote control (native) 21:31:41.3461 driver/rc.cpp:143 getDeviceName [eRCInputEventDriver] devicename=dreambox advanced remote control (native) 21:31:41.3461 driver/rcinput.cpp:702 eRCDeviceInputDev [eRCDeviceInputDev] device "dreambox advanced remote control (native)" is a remotecontrol 21:31:41.3461 driver/rcinput.cpp:775 add [eInputDeviceInit] adding device /dev/input/event2 21:31:41.3462 driver/rc.cpp:143 getDeviceName [eRCInputEventDriver] devicename=front panel 21:31:41.3462 driver/rc.cpp:143 getDeviceName [eRCInputEventDriver] devicename=front panel 21:31:41.3462 driver/rcinput.cpp:702 eRCDeviceInputDev [eRCDeviceInputDev] device "front panel" is a remotecontrol 21:31:41.3462 driver/rcinput.cpp:775 add [eInputDeviceInit] adding device /dev/input/event3 21:31:41.3463 driver/rc.cpp:143 getDeviceName [eRCInputEventDriver] devicename=Realtek RTL2832U reference design 21:31:41.3463 driver/rc.cpp:143 getDeviceName [eRCInputEventDriver] devicename=Realtek RTL2832U reference design 21:31:41.3463 driver/rcinput.cpp:702 eRCDeviceInputDev [eRCDeviceInputDev] device "Realtek RTL2832U reference design" is a remotecontrol 21:31:41.3463 driver/rcinput.cpp:775 add [eInputDeviceInit] adding device /dev/input/event4 21:31:41.3464 driver/rc.cpp:143 getDeviceName [eRCInputEventDriver] devicename=MCE IR Keyboard/Mouse (dvb_usb_rtl28xxu) 21:31:41.3464 driver/rc.cpp:143 getDeviceName [eRCInputEventDriver] devicename=MCE IR Keyboard/Mouse (dvb_usb_rtl28xxu) 21:31:41.3465 driver/rcinput.cpp:702 eRCDeviceInputDev [eRCDeviceInputDev] device "MCE IR Keyboard/Mouse (dvb_usb_rtl28xxu)" is a keyboard 21:31:41.3465 driver/rcinput.cpp:775 add [eInputDeviceInit] adding device /dev/input/event5 21:31:41.3465 driver/rc.cpp:143 getDeviceName [eRCInputEventDriver] devicename=ITE 9135(9006) Generic 21:31:41.3465 driver/rc.cpp:143 getDeviceName [eRCInputEventDriver] devicename=ITE 9135(9006) Generic 21:31:41.3466 driver/rcinput.cpp:702 eRCDeviceInputDev [eRCDeviceInputDev] device "ITE 9135(9006) Generic" is a remotecontrol 21:31:41.3466 driver/rcinput.cpp:760 eInputDeviceInit [eInputDeviceInit] Found 6 input devices. 21:31:44.8019 Components/InputDevice.py:47 getInputDevices [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device > 21:31:44.8077 Components/InputDevice.py:64 getInputDeviceType Unknown device type: Realtek RTL2832U reference design 21:31:44.8137 Components/InputDevice.py:64 getInputDeviceType Unknown device type: front panel 21:31:44.8257 Components/InputDevice.py:64 getInputDeviceType Unknown device type: ITE Technologies, Inc. DVB-T TV Stick 21:31:44.8260 Components/InputDevice.py:47 getInputDevices [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device > Te līdzīgas problēmas ar diviem rt2832u https://www.opena.tv/english-section/29214-dvb-usb-compatible-dreambox-openatv-2.html Labots Februāris 11, 2019 - kellerman Link to comment Share on other sites More sharing options...
base7 Februāris 12, 2019 Share Februāris 12, 2019 Es jau vairākkārt teicis un varu atkārtot, pirms pāris gadiem uz VU+ aparāta VTV izdevās piekurbulēt ar puļķi uz Microtune AF9135 čipa (tiesa, uz pašas plates bija rakstīts it9135). Draiveri bija jānovelk no fīda. OpenPLI/BH imidži. Link to comment Share on other sites More sharing options...
xp Februāris 12, 2019 Share Februāris 12, 2019 (labots) Ir nesen mēģināts uz Vu plus. RTL2832u puļķis. Uz dažādiem Vu tie uzvedās savādāk - Vu Zero OpenPLI, kā arī Black hole. Vu plus SOLO tikai ar Black hole (tur pat nevajadzēja draiveri lejupielādēt - pats atpazinās). Pasākums ir ejošs tikai tāds drusku bremzīgs salīdzinot ar iebūvētiem uztvērējiem. Uz DM800 vismaz ar OpenPLi neiet - dīvaini. (varbūt kāds no šejienes ir piedabūjis pie DM800?) Labots Februāris 12, 2019 - xp Link to comment Share on other sites More sharing options...
formens Februāris 12, 2019 Share Februāris 12, 2019 VU solo2 clone,OpenPLI 6.2,,RTL2832u puļķis.Draiverus novilku no fida,pārstartēju,viss aizgāja. Link to comment Share on other sites More sharing options...
kellerman Februāris 12, 2019 Author Share Februāris 12, 2019 (labots) Uz dažādām kastēm un imidžiem tur viss uzvedas savādāk. Par Vu un Blackhole lasīju, kaut kas tur ar it913x/rtl28xxu BH imidžā ir ticis labots. Vēl nepamēģināju uz openpli vai openatv 6.2, bet tur arī laikam tā pati kerneļa versija. Varbūt varat kāds padalīties ar saarhivētām /lib/firmware un /lib/modules mapēm no kastes (tiem, kam iet it913x/rtl28xxu draiveri). Aizdomas tomēr krīt uz gļuhainiem draiveriem, varbūt sanāk pārsvapot. edit: Diez vai tur kaut kas sanāks līdz būs normāls atbalsts kastei un 4.4 kodolam ar dvb usb draiveriem. Labots Februāris 12, 2019 - kellerman Link to comment Share on other sites More sharing options...
leonv Februāris 16, 2019 Share Februāris 16, 2019 Uz VU+ zero, solo 4k, uno 4k, ar BH imidžu viss iet 9135, 9035, 2832 chipi Uz DM800 ejot it kā ar 9015 un 9035 chipiem Link to comment Share on other sites More sharing options...
kellerman Februāris 17, 2019 Author Share Februāris 17, 2019 (labots) Jā, BH un VU viss ir salabots. Cerams salabos arī uz hisi platformas. Labots Februāris 17, 2019 - kellerman Link to comment Share on other sites More sharing options...
kellerman Aprīlis 9, 2019 Author Share Aprīlis 9, 2019 Ir salabots uz hisi, draiveri jau gāja, bet tagad arī pati enigma puļķi atpazīst. Mēģināju uz zgemma h9s ar OpenVIX jaunāko imidžu. it1935/af9035 gan pašlaik negāja. Link to comment Share on other sites More sharing options...
camel Aprīlis 10, 2019 Share Aprīlis 10, 2019 Mēģināju uz zgemma h5 openpli 7 palaist usb af90?? puļķi (papildus iebūvētajam dvb-t), draiveri itkā uzlikās bet uztvērēju sarakstā pulķis neparādijās. Ieklabināju lsmod, modprobe af9013, pārstartēju enigmu - tad parādijās. Diemžēl signāls no antenas bija laikam par vāju, vai arī puļķis nemāk padot strāvu antenai. Link to comment Share on other sites More sharing options...
gromix Aprīlis 10, 2019 Share Aprīlis 10, 2019 Pirms 43 minūtēm , camel teica: puļķis nemāk padot strāvu antenai. Šiem puļķiem nemaz nav paredzēta antenas aktīvā barošana Link to comment Share on other sites More sharing options...
kellerman Aprīlis 12, 2019 Author Share Aprīlis 12, 2019 Realtek pulķim var padot papildus strāvu tunera settingos to norādot. Viņi tās dvb-t usb lietas sākuši labot jaunākajos imidžos.Varbūt af9035 būtu gājis, bet man tas īpaši neinteresēja, un pēc pieredzes rtl2832u ir gājis daudz stabilāk.Sent from my Redmi Note 5 using Tapatalk Link to comment Share on other sites More sharing options...
formens Aprīlis 12, 2019 Share Aprīlis 12, 2019 Nezinu,bet man tie 5V ko var padot no uztvērēja izrādijās krietni par maz,lai dabūtu signālu.Pievienojot 12V barokli viss lieliski. Antena Iskra P2845 GLT.Specifikācija paredz barošanu 5-24V DC Link to comment Share on other sites More sharing options...
base7 Maijs 9, 2019 Share Maijs 9, 2019 Lai neveidotu speciālu tēmu, ielikšu šeit. Cerams, ka @kellermanneiebildīs. Ja nu kādu interesē, Joka pēc pasūtīju wifi puļķi priekš VU+ kastes. pirms pāris dienām atnāca. Apmēram šāds: https://ru.aliexpress.com/item/CHIPAL-150-Ralink-RT5370-Mini-USB-2-0-WiFi/32834257814.html?spm=a2g0s.9042311.0.0.382033edF7akL9 Jau patestēju. Darbojas stabili. It kā nekādu pārrāvumu nav. 1 Link to comment Share on other sites More sharing options...
goicis Maijs 13, 2019 Share Maijs 13, 2019 2019.05.9. , 16:40, base7 teica: https://ru.aliexpress.com/item/CHIPAL-150-Ralink-RT5370-Mini-USB-2-0-WiFi/32834257814.html?spm=a2g0s.9042311.0.0.382033edF7akL9 Man šāds jau gadu vismaz ripo uz Uno se!Nekādu problēmu!!! Link to comment Share on other sites More sharing options...
Recommended Posts
Izveido kontu, vai pieraksties esošajā, lai komentētu
Jums ir jābūt šī foruma biedram, lai varētu komentēt tēmas
Izveidot jaunu kontu
Piereģistrējies un izveido jaunu kontu, tas būs viegli!
Reģistrēt jaunu kontuPierakstīties
Jums jau ir konts? Pierakstieties tajā šeit!
Pierakstīties tagad!