Jump to content

PC nestartējas ar ieslēgšanas pogu


Fast
 Share

Recommended Posts

Stacionāro PC ieslēdzot ar ieslēgšanos pogu 3 reizes nopīkst un neko uz ekrāna nerāda, bet cieta diska lampiņa mirgo. Bet tad nospiežot restart pogu dators sāk rādīt bildi un izmet šādu paziņojumu.

Kur problēma?

tbnmna7kr30d0oq0fc.jpg

Link to comment
Share on other sites

Ja tāda ir tava izpratne par šo tehniku, tad nāksies samaksāt kādam kurš saprot kā kompis strādā.

Link to comment
Share on other sites

Paldies, par izsmeļošo atbildi - nepalīdzēji.

Aktuāli vēl.

Labots - Fast
Link to comment
Share on other sites

Tev jau atbildi pateica! Vēl vari pats sev aklo zarnu izgriezt, noteikti jau arī ir kādas zināšanas.

Link to comment
Share on other sites

Mātesplates manuālī rokasgrāmatā rakstīti pīkstienu kodi, atšķir, pameklē, būs varbūt atbilde uz jautājumu, kas ir nojucis. 

Link to comment
Share on other sites

a kur PC apraksts?

ekstrasensi atvalinajumā

Labots - Tubus
Link to comment
Share on other sites

CPU - Intel Core 2 Dou E4400

MB - asus p5ld2-x

VGA - Geforce 8500GT

RAM - Kingston 2x1gb

HDD - Toshiba 500 gb

Link to comment
Share on other sites

PSU? kompis vecs, PSU >>> no tutanhamona laikiem

MB - asus p5ld2-x 

https://www.asus.com/Motherboards/P5LD2X1333/HelpDesk_Manual/

AMI BIOS beep codes

http://www.computerhope.com/beep.htm

 

http://www.computerhope.com/issues/ch000996.htm

 

http://www.pchell.com/hardware/beepcodes.shtml 

Your computer has memory problems. First check video. If video is working, you'll see an error message. If not, you have a parity error in your first 64K of memory. First check your SIMM's. Reseat them and reboot. If this doesn't do it, the memory chips may be bad. You can try switching the first and second banks memory chips. First banks are the memory banks that your CPU finds its first 64K of base memory in. You'll need to consult your manual to see which bank is first. If all your memory tests good, you probably need to buy another motherboard.

Labots - Tubus
Link to comment
Share on other sites

Manuālī nav 3 pīkstienu aprakstīti:

 

post-97578-0-94454000-1447927720_thumb.jpg

Link to comment
Share on other sites

Power vadi un visi pārējie vadi pareizi salikti? Kad sākās problēmas?

Link to comment
Share on other sites

Kad sākās problēmas?

 

ieslēdzās apkure

kompis dabūja ar slotu

Labots - Tubus
Link to comment
Share on other sites

Vienā vakarā izslēdzu shut down.

Nākošajā rīta slēdzot iekšā sāka pīkstēt un mest šo logu.  Bildi rāda kad nospiež Restart pogu.

Es domāju windows pie vainas, to pārinstelēju un bez izmaiņam.

Tad domāju, ka HDD pa gala to izgāju cauri ar HDTune tur viss kārtībā.

Labots - Fast
Link to comment
Share on other sites

 

AMI BIOS Beep Codes:

3 short Base 64K memory failure A memory failure has occurred in the first 64K of RAM.  The RAM IC is probably bad

 

 

1 long, 2 short Failure in video system An error was encountered in the video BIOS ROM, or a horizontal retrace failure has been encountered

 

Link to comment
Share on other sites

Izveido kontu, vai pieraksties esošajā, lai komentētu

Jums ir jābūt šī foruma biedram, lai varētu komentēt tēmas

Izveidot jaunu kontu

Piereģistrējies un izveido jaunu kontu, tas būs viegli!

Reģistrēt jaunu kontu

Pierakstīties

Jums jau ir konts? Pierakstieties tajā šeit!

Pierakstīties tagad!
 Share

×
×
  • Izveidot jaunu...